Gold Member Since 2012
Audited Supplier
Xuzhou First Chemical Co., Ltd.

Lldpe, Plastic Raw Materials, Granular manufacturer / supplier in China, offering Linear Low Density Polyethylen (LLDPE) Granule, Calcium Hydroxide/ Hydrated Lime, DAP Fertilizer Diammonium Phosphate Compound Fertilizer Manufacturer and so on.

(/ )

Supplier Homepage Product Plastic Materials Linear Low Density Polyethylen (LLDPE) Granule

Linear Low Density Polyethylen (LLDPE) Granule

FOB Price: Get Latest Price
Min. Order: 20 Tons
Production Capacity: 1500 Ton Per Month
Transport Package: 25 Kg PP Bags
Payment Terms: L/C, T/T
Basic Info
  • Material: Linear Low Density Polyethylene/LLDPE
  • Color: White
  • Trademark: China
  • Origin: Jisngsu, China
  • Usage: General Plastics, Engineering Plastics
  • Appearance: White Granular
  • Specification: SGS
  • HS Code: 3901902000
Product Description
1) Virgin lldpe/ldpe/mdpe/hdpe granules
2)Certification: SGS ISO9001
3)direct producer
4) prompt delivery
Linear low density polyethylene (LLDPE)
Production of linear low density polyethylene to ethylene as the main raw material, 1 - butene or 1 - hexene as comonomer, the catalyst for the gas fluidized bed polymerization. Reaction out of material by granulation, drying, and sent packing.
Performance of linear low density polyethylene non-toxic, tasteless, odorless white particles, density of 0.918 ~ 0.935g/cm3. Compared with LDPE, and the higher softening temperature and melting temperature, there is strength, toughness, rigidity, heat, cold and good, but also has good resistance to environmental stress cracking resistance, impact strength, resistance tear strength properties. And can be acid, alkali, organic solvents.
Use for the production of plastic sheeting, packaging films, laminated films, tubes, hollow containers, wire, cable insulation layer.

Product Description:

1. Good quality and reasonable price

2. Non-poteonods no smell adurless

3. It can replaced original plastic material, sometimes it can replace new material


1. Blow molding grade,

2. Injection molding grade,

3. Film grade;

4. Extrusion grade.


Fiber (Carpet, Textiles, Upholstery, etc. )
Film (Shopping bags, casting film, multilayer film, etc. )
Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
Extrusion Molding (Sheet, Pipe, Wire & Cable, etc. )
Injection Molding (Automotive, Electronic, Construction, House wares, Furniture, Toys, etc. )
Melt Flow Index g/10min ≤1.0
Density g/cm3 ≤0.945
Tensile strength  Mpa ≥14.0
Elongation at break % ≥600
Brittle temperature at low temperature °C ≤-76
ESCR ,FO H ≥500
Carbon Black dispersion -- --
Tensile strength after thermal aging  Mpa ≥13
Elongation after thermal aging % ≥500
Dielectric strength Mv/m ≥25
Volume resistivity Ω.m ≥1*1014
change rate of tensile strength 
after weather aging environment of 0--1008h
% ±25
change rate of elongation
 after weather aging environment of 0--1008h
% ±25
change rate of tensile strength
 after weather aging environment of 504--1008h
% ±15
change rate of elongation
after weather aging environment of 504--1008h
% ±15

Product Categories
Send your message to this supplier
Ms. Andrea
To: Ms. Andrea

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category